January 13, 2020
Highly efficient power usage and enhanced coverage makes the NE310H2-W1 and NL865H2-W1 ideal for 2G to 4G NB-IoT transition. The miniature xE310 form factor allows for integration in the most compact devices, the xL865 family guarantees smooth evolution for devices based on legacy Telit modules.
Telit recently announced two new Narrow Band-IoT modules to the Telit portfolio, the NE310H2-W1 and NL865H2-W1. With a global set of bands from Telit unified family form factors, the modules are ideal for 2G to 4G NB-IoT transition and offer the lowest power consumption for battery-driven applications that will help optimize cost. In addition to extending coverage for ubiquitous connectivity, use cases include smart metering for electricity, gas and water, smart city applications, smart agriculture and almost any type of industrial sensor or mass-deployment application—all of which benefit from low power and enhanced coverage without high data rate requirements.
NE310H2-W1, with its 15x18mm LGA form factor, is perfect for size-constrained applications with low power consumption, pin-to-pin compatible with 2G and LTE-M modules of the miniature Telit xE310 Family. Optimized for ease-of-design, high yield and low-cost manufacturing, this module is compliant to 3GPP Release 14 Cat NB2. The NE310H2 is also backward compatible with 3GPP Release 13 and LTE Cat NB1 standard.
NL865H2-W1, with its well-known and widely deployed 24.4×24.4mm VQFN form factor, guarantees a smooth evolution for all those customers that want to upgrade and future proof their devices based on Telit 2G and 3G xL865 module, with limited redesign effort and optional built-in eSIM available for the NL865H2-W1 for connectivity integrated in the module. It is also LTE UE Category NB2 compliant to the latest 3GPP Release 14.
‘’The launch of NE310H2-W1 and NL865H2-W1 will address some of the major challenges OEMs, integrators and device designers have been facing,” said, Manish Watwani, chief marketing and product officer, Telit. “Particularly for connectivity and battery life, our new modules dramatically increase the number of data points they can collect from their operations and customers via IoT devices. With IoT now possible at scale and cost, it makes many previously unviable deployments ROI positive.’’
- LTE UE Category NB2 (200 KHz)
- 3GPP release 14 compliant
- Half Duplex FDD
- Single Rx, single antenna
- 3GPP Rel. 12 Power Saving Mode
- 3GPP Rel. 13 Extended Discontinuous
- 3GPP Rel. 13 Extended coverage
- 3GPP Rel.13 Release Assistance
- Control via AT commands according to
3GPP TS27.005, 27.007
- SMS over NB-IoT
- IPv4/IPv6 stack with TCP and UDP
- TLS / DTLS
- OMA Lightweight M2M (LWM2M)
- Over-the-Air firmware update
- Dimensions: 24.4 x 24.4 x 2.3mm
- 8 I/O ports
- 8V SIM Interface
- USB 1.1 (debug only)
- 2 x UARTs
- Dimensions: 15 x 18 x 2.3 mm
- 6 I/O ports
- 1.8V SIM Interface
- USB 1.1 (debug only)
- 3 x UARTs
The nRF52805 System-on-Chip (SoC) augments the industry-leading nRF52 Series with an SoC in a WLCSP optimized for small two-layer PCB designs, ideal for cost-constrained applications. It is the perfect choice for applications such as beacons, disposable medical...
400W 3” x 5” medical and industrial power supplies deliver 250W convection/conduction cooled with 400W peak power for extended time periods
TDK Corporation (TSE:6762) announces the introduction of the TDK-Lambda brand CUS400M medical and industrial certified AC-DC power supplies, packaged in the industry standard 3” x 5” footprint. With forced air, the series can provide 400W and 250W can be supplied when...
TDK Corporation (TSE 6762) announces the introduction of the i7C series of 8A 300W rated non-isolated DC-DC converters, packaged with the industry standard 1/16th pinout. The output voltage of these step-up and step-down converters can be adjusted from 9.6 to 48V and...
Stay Up to Date With The Latest News & Updates
Join Our Newsletter
Join our monthly newsletter for the latest updates in the electronics industry